Drill Bits & Drive Sockets

Drill bits prepare holes for rivets and fixings that require predrilling. Drive sockets grip the fixing head during installation, with the size, reach and tool connection selected to suit the application.

Drill Bits

Drill bits are used for rivet holes, fixings that require predrilling and specified clearance holes through sheets or components. Choose the drill type for the material being drilled, and follow the relevant fixing and sheet manufacturer’s requirements for the hole diameter.

Diameter, working length and shank type determine which drill bit suits the job. Check the usable working length for the drilling depth, the overall length for access, and the shank for compatibility with the tool’s chuck or holder.

Drive Sockets

Drive sockets install hex head roofing and cladding fixings. Socket size refers to the measurement across the flats of the head, rather than the screw’s thread diameter. The socket must seat fully, with sufficient depth and reach and the correct connection for the installation tool.

Magnetic and clip retaining sockets hold fixings in different ways, so the retention method must suit the head material and design. Painted or moulded heads may require a specific socket to engage correctly and protect the finish.

Use & Care

Follow the drill bit manufacturer’s guidance for drilling speed and the fixing manufacturer’s instructions for installation. Use the specified tool and settings to seat the fixing correctly without overtightening or damaging the head, washer or sheet.

Replace worn drill bits and sockets, and keep sockets clear of swarf so they engage fully with the fixing head. Remove drilling swarf from roof and wall sheets promptly to help prevent staining and damage to the coating.